Ordered until Monday 5 pm, delivered on Tuesday
- Order number: SB104
There are many meters of piping in every spa. Due to different flow behavior, dirt deposits and biofilm can accumulate in the pipes. Therefore, it is recommended to thoroughly clean the pipes once a year.
SpaBalancer System Flush was developed for this intensive cleaning of the whirlpool piping:
- It removes biofilm very quickly and aggressively.
- It removes calcium deposits.
- It removes grease and oil.
- It is a biocide and kills germs and bacteria.
One bottle of SpaBalancer System Flush is enough for a spa with 1,500 liters of water capacity. In particularly difficult cases (such as older, used spas), you can use twice the amount.
Application:
1. Remove the filters.
2. Shake the bottle well.
3. Start all pumps and pour the bottle of SpaBalancer System Flush into the water.
4. Excessive foaming can be prevented with SpaBalancer Anti Foam.
5. Leave the SpaBalancer System Flush to work overnight.
6. The next day, run the pumps again for 20 minutes.
7. Drain the spa.
8. Thoroughly flush the plumbing through the jets with a garden hose.
9. Fill the spa with fresh water.
After using SpaBalancer System Flush, perform a shock treatment with SpaBalancer Ultrashock. SpaBalancer System Flush is a foaming cleaning agent. The shock treatment neutralizes existing residual amounts in the fresh water.
Reinigt die Rohre super!
Super Systemreiniger
Hat wirklich gut gereinigt...
Sehr gut
Rohr war fast schwarz und jetzt ist es weiss. Damen hoch