Pool tester with 30 tablets each Shock / pH

The SpaBalancer manual shaker tester measures the shock and pH value in the water. The handling is very easy and provides reliable measurement results.

Package contents

• 1 storage box
• 1 Shock tester with measuring scale and lid
• 30 x DPD No. 1 (Shock)
• 30 x Phenol Red (pH)
• Instructions

Application

• Fill the shaking tester with water from the whirlpool.
• Place the tester so that you can see the measuring scale in front of you.
• In order to be able to read the measured value correctly, the tablets must be placed in the narrower chamber next to the corresponding measuring scale (see photo).
• Close the shaker tester with the corresponding lid and shake it well for a few seconds until the tablets have dissolved.
• Based on the coloration of the water and the adjacent color scale, you can now determine the shock value and pH value in your water.

Care

Clean the Shock Tester thoroughly with water after use.
Important: Please do not use any cleaning agents, as these can falsify the measurement result.

Notes

Depending on the packaging, the Shock tablets in the blister may be labeled DPD No. 1 on the back and the pH tablets may be labeled Phenol Red.
To prevent false results, the tablets for this pool tester must not be used for the Pool Lab, Prime Lab or other photometers.